1. The needle is composed of needle hub, needle cannula and protective cap. The materials used meet the medical requirements.
2. Needle hub and protective cap(sheath) are made of medical grade polypropylene.The material is provided by Borouge,SINOPEC or CNPC.
3. Steel cannula is made of medical grade SUS304(steel cannula).Nipro or Terumo needle is available.
4. This product is suitable for injection into human skin, subcutaneous, muscle, vein, etc.
5. The needle tube adopts the international popular thin wall tube design, with large inner diameter and high flow rate.
6. Fine design of needle tip, good sharpness of three blade structure, fast needle puncture, less pain and less tissue damage.
7. 6:100 conical fitting produced according to international standards, with accurate size, be compatible with medical devices.
8. The specification identified by color of needle hub, easy to distinguish and use, with translucent design, easy to observe.
9. Pyrogen-free,Toxic-free,BPA free,DEHP free.Sterilized by EO gas or Gamma radiation(different material from normal).
10. IFU is available.

Inquiry Now

1. The needle is composed of needle hub, needle cannula and protective cap. The materials used meet the medical requirements.
2. Needle hub and protective cap(sheath) are made of medical grade polypropylene.The material is provided by Borouge,SINOPEC or CNPC.
3. Steel cannula is made of medical grade SUS304(steel cannula).Nipro or Terumo needle is available.
4. This product is suitable for injection into human skin, subcutaneous, muscle, vein, etc.
5. The needle tube adopts the international popular thin wall tube design, with large inner diameter and high flow rate.
6. Fine design of needle tip, good sharpness of three blade structure, fast needle puncture, less pain and less tissue damage.
7. 6:100 conical fitting produced according to international standards, with accurate size, be compatible with medical devices.
8. The specification identified by color of needle hub, easy to distinguish and use, with translucent design, easy to observe.
9. Pyrogen-free,Toxic-free,BPA free,DEHP free.Sterilized by EO gas or Gamma radiation(different material from normal).
10. IFU is available.

Inquiry Now

1. The needle is composed of needle hub, needle cannula and protective cap. The materials used meet the medical requirements.
2. Needle hub and protective cap(sheath) are made of medical grade polypropylene.The material is provided by Borouge,SINOPEC or CNPC.
3. Steel cannula is made of medical grade SUS304(steel cannula).Nipro or Terumo needle is available.
4. This product is suitable for injection into human skin, subcutaneous, muscle, vein, etc.
5. The needle tube adopts the international popular thin wall tube design, with large inner diameter and high flow rate.
6. Fine design of needle tip, good sharpness of three blade structure, fast needle puncture, less pain and less tissue damage.
7. 6:100 conical fitting produced according to international standards, with accurate size, be compatible with medical devices.
8. The specification identified by color of needle hub, easy to distinguish and use, with translucent design, easy to observe.
9. Pyrogen-free,Toxic-free,BPA free,DEHP free.Sterilized by EO gas or Gamma radiation(different material from normal).
10. IFU is available.

Inquiry Now

1. The needle is composed of needle hub, needle cannula and protective cap. The materials used meet the medical requirements.
2. Needle hub and protective cap(sheath) are made of medical grade polypropylene.The material is provided by Borouge,SINOPEC or CNPC.
3. Steel cannula is made of medical grade SUS304(steel cannula).Nipro or Terumo needle is available.
4. This product is suitable for injection into human skin, subcutaneous, muscle, vein, etc.
5. The needle tube adopts the international popular thin wall tube design, with large inner diameter and high flow rate.
6. Fine design of needle tip, good sharpness of three blade structure, fast needle puncture, less pain and less tissue damage.
7. 6:100 conical fitting produced according to international standards, with accurate size, be compatible with medical devices.
8. The specification identified by color of needle hub, easy to distinguish and use, with translucent design, easy to observe.
9. Pyrogen-free,Toxic-free,BPA free,DEHP free.Sterilized by EO gas or Gamma radiation(different material from normal).
10. IFU is available.

Inquiry Now

1. The needle is composed of needle hub, needle cannula and protective cap. The materials used meet the medical requirements.
2. Needle hub and protective cap(sheath) are made of medical grade polypropylene.The material is provided by Borouge,SINOPEC or CNPC.
3. Steel cannula is made of medical grade SUS304(steel cannula).Nipro or Terumo needle is available.
4. This product is suitable for injection into human skin, subcutaneous, muscle, vein, etc.
5. The needle tube adopts the international popular thin wall tube design, with large inner diameter and high flow rate.
6. Fine design of needle tip, good sharpness of three blade structure, fast needle puncture, less pain and less tissue damage.
7. 6:100 conical fitting produced according to international standards, with accurate size, be compatible with medical devices.
8. The specification identified by color of needle hub, easy to distinguish and use, with translucent design, easy to observe.
9. Pyrogen-free,Toxic-free,BPA free,DEHP free.Sterilized by EO gas or Gamma radiation(different material from normal).
10. IFU is available.

Inquiry Now

1. Structure: The infusion set is composed of the protective cap of the spike, spike, the air filter or the air- inlet device, the drip tube, the drip chamber, the tube, the stop clip, the three-way, the injection part, the flow regulator, the liquid medicine filter, the outer luer connector, the outer luer connector protective cap and the scalp vein set.
2. Function: It is used for intravenous infusion of drug solution for patients. The air intake type is suitable for infusion bottles and the non- air intake type is suitable for infusion bags.
3. Specification: Vented type, non-vented type
4. With needle: Single wing, double wing, wingless
5. Pyrogen-free,Toxic-free,BPA free,DEHP or DEHP free,latex or latex free.Sterilized by EO gas.
6. Primary packaging is blister peel pouch or tear polybag(PE bag).

Inquiry Now

1. Structure: The infusion set is composed of the protective cap of the spike, spike, the air filter or the air- inlet device, the drip tube, the drip chamber, the tube, the stop clip, the three-way, the injection part, the flow regulator, the liquid medicine filter, the outer luer connector, the outer luer connector protective cap and the scalp vein set.
2. Function: It is used for intravenous infusion of drug solution for patients. The air intake type is suitable for infusion bottles and the non- air intake type is suitable for infusion bags.
3. Specification: Vented type, non-vented type
4. With needle: Single wing, double wing, wingless
5. Pyrogen-free,Toxic-free,BPA free,DEHP or DEHP free,latex or latex free.Sterilized by EO gas.
6. Primary packaging is blister peel pouch or tear polybag(PE bag).

Inquiry Now

1. Structure: The infusion set is composed of the protective cap of the spike, spike, the air filter or the air- inlet device, the drip tube, the drip chamber, the tube, the stop clip, the three-way, the injection part, the flow regulator, the liquid medicine filter, the outer luer connector, the outer luer connector protective cap and the scalp vein set.
2. Function: It is used for intravenous infusion of drug solution for patients. The air intake type is suitable for infusion bottles and the non- air intake type is suitable for infusion bags.
3. Specification: Vented type, non-vented type
4. With needle: Single wing, double wing, wingless
5. Pyrogen-free,Toxic-free,BPA free,DEHP or DEHP free,latex or latex free.Sterilized by EO gas.
6. Primary packaging is blister peel pouch or tear polybag(PE bag).

Inquiry Now

1. The product consists of a stopper piercer protective cover, a stopper piercer, an injection part, a graduated burette, a shut-off valve, a dropper, a chemical liquid filter (the nominal pore size of the filter membrane is 20±1μm), an air filter, a pipeline, flow regulator, external conical joint and scalp vein needle.
2. The product is suitable for pediatric infusion and occasions where precise monitoring of infusion dose is required.
3. Chamber size:100ml or 150ml
4. Pyrogen-free,Toxic-free,BPA free,DEHP or DEHP free,latex or latex free.Sterilized by EO gas.
5. Primary packaging is blister peel pouch or tear polybag(PE bag).

Inquiry Now

1. Structure: The infusion set is composed of the protective cap of the spike, spike, the air filter or the air- inlet device, the drip tube, the drip chamber, the tube, the stop clip, the three-way, the injection part, the flow regulator, the liquid medicine filter, the outer luer connector, the outer luer connector protective cap and the scalp vein set.
2. Function: It is used for intravenous infusion of drug solution for patients. The air intake type is suitable for infusion bottles and the non- air intake type is suitable for infusion bags.
3. Specification: Vented type, non-vented type
4. With needle: Single wing, double wing, wingless
5. Pyrogen-free,Toxic-free,BPA free,DEHP or DEHP free,latex or latex free.Sterilized by EO gas.
6. Primary packaging is blister peel pouch or tear polybag(PE bag).

Inquiry Now

1. Scalp vein needle is mainly for clinical use, matching with disposable infusion (transfusion) device or syringe for human intravenous infusion of Medicine (blood) liquid.
2. Single wing design, meet different requirements of clinical operation, easy to fix, specification identified by the color of wing, easy to distinguish and use.
3. Made of high quality austenitic stainless steel.
4. The needle tube adopts the international popular thin wall tube design, with large inner diameter and high flow rate.
5. Fine design of needle tip, good sharpness.
6. 6% conical fitting produced according to international standards, with accurate size, matching with medical devices .
7. The infusion pipeline is diversified, from transparent type, translucent type to frosted type, from high elasticity to hard tube, to meet different clinical requirements;
8. With needle: Single wing or double wing
9. Pyrogen-free,Toxic-free,BPA free,DEHP or DEHP free,latex or latex free.Sterilized by EO gas.
10. Primary packaging is blister peel pouch or tear polybag(PE bag).

Inquiry Now

1. Scalp vein needle is mainly for clinical use, matching with disposable infusion (transfusion) device or syringe for human intravenous infusion of Medicine (blood) liquid.
2. Single wing design, meet different requirements of clinical operation, easy to fix, specification identified by the color of wing, easy to distinguish and use.
3. Made of high quality austenitic stainless steel.
4. The needle tube adopts the international popular thin wall tube design, with large inner diameter and high flow rate.
5. Fine design of needle tip, good sharpness.
6. 6% conical fitting produced according to international standards, with accurate size, matching with medical devices .
7. The infusion pipeline is diversified, from transparent type, translucent type to frosted type, from high elasticity to hard tube, to meet different clinical requirements;
8. With needle: Single wing or double wing
9. Pyrogen-free,Toxic-free,BPA free,DEHP or DEHP free,latex or latex free.Sterilized by EO gas.
10. Primary packaging is blister peel pouch or tear polybag(PE bag).

Inquiry Now